Repair first, replace when it's worth it
A lot of "broken" locks aren't broken. The door has dropped, the strike plate has shifted, or the cylinder needs cleaning and lubricating. We find the actual cause and fix that, which is often cheaper than a new lock. When a lock is worn out or not secure enough, we'll say so and quote a replacement.
Common lock problems we fix
- Key is hard to turn or only works at a certain angle: usually a worn cylinder, a worn key or door misalignment.
- Deadbolt won't throw fully: the bolt is hitting the strike. We adjust or re-cut the strike.
- Latch doesn't catch and the door swings open: often a sagging hinge or a door closer that needs adjusting.
- Handle is loose or droops: worn springs or fixings inside the lock body.
- Sliding door won't lock: worn hook locks and rollers on balcony and courtyard doors, common in harbourside apartments where salt air wears hardware faster.
- Window locks seized or missing keys.
- Digital lock faults: flat batteries, unresponsive keypads and motor failures.
Lock installation
We supply and fit:
- Deadbolts and deadlatches for front and back doors
- Mortice locks and lever handle sets
- Sliding door locks and patio bolts
- Window locks and restrictors
- Security screen door locks
- Keypad, digital and smart locks
- Door closers, door stops and hinges
- Gate locks and padlocks
Every lock is fitted square, with a properly cut strike and the right screws, then tested with the door open and closed. A good lock fitted badly is a weak lock.
Fire doors and exit doors
Apartment entry doors, stairwell doors and many commercial doors are fire-rated or on an egress path. Hardware on these doors has to suit the rating and allow people to get out in an emergency. We choose compliant hardware and won't fit something that compromises a fire door. For offices and shops, see commercial locksmith.
Salt air and harbour hardware
Properties along the western harbour, from Barangaroo to Walsh Bay and Dawes Point, see faster corrosion on external locks and balcony door hardware. We recommend marine-grade or stainless finishes for exposed doors, and a light service each year to keep them turning smoothly.
Common questions
Is it cheaper to repair or replace a lock?
If the problem is alignment, lubrication or a worn strike, repair is usually cheaper. If the lock body or cylinder is worn out, replacement is better value long term. We'll tell you which on site.
Can you supply the lock or do I have to buy it?
We carry common locks and hardware in the van. If you've already bought a lock, we can fit it, but we'll let you know if it's not suitable for the door.
Do you fix sliding balcony door locks?
Yes. Worn hook locks and rollers on sliding doors are one of the most common repairs we do in harbourside apartments.